Перейти к содержимому

Донат
На хостинг
ISK за переводы
до 75kk за 1000зн.
Хроники EVE
Сборник
Новичкам
Полезная информация
Фотография

EVE Online + GNU/Linux


  • Авторизуйтесь для ответа в теме
4847 ответов в теме

#2261
ApostolRUS

ApostolRUS

    Clone Grade Delta

  • Tech III Pilots
  • PipPip
  • 230 сообщений
-43
  • EVE Ingame:-//-//-
  • Corp:Quinto Regimiento
  • Ally:Quinta columna
  • Client:Eng

Сразу после логона - 72fps
по прошествии ~минуты - 92fps
по пути в Jita'у - 112fps - 118fps
в Jita'е - 34fps - 56fps
в Jita'е сразу после припрыга к станции упало до 14fps где-то на 2-3 секунды.

По загрузке проца: 25% - 27% всё время.

Intel® Core™2 Quad CPU Q9300 @ 2.50GHz
RAM - 8Gb
Video - nVidia 8800GTS - 512Mb
Gentoo Linux x86, Compiz+XFCE4-Panel+XfDesktop
Compiz не отключаю, играю в той-же сессии Х'ов.
Показания сняты 02.08.2010 в 20:50 по Москве.


Отсюда вопрос, почему у вас EVE жрёт столько проца? :)

Пороц: DualCore Intel Pentium D 925, 3000 MHz (15 x 200)
Мать: Asus P5PL2 (3 PCI, 2 PCI-E x1, 1 PCI-E x16, 4 DDR2 DIMM, Audio, Gigabit LAN)
Память: 2048 Мб (DDR2-800 DDR2 SDRAM)
Видеокарта: NVIDIA GeForce 9600 GT (512 Мб)
Монитор: Asus VW222 [22" LCD] (7BLMQS021199) Соответственно играю на разрешении 1680х1050

Температура проца скачет до 85 градусов, может из-за этого
  • 0

Пользователь №: 231

Изображение


#2262
hash

hash

    Clone Grade Delta

  • Tech III Pilots
  • PipPip
  • 202 сообщений
8
  • EVE Ingame:HASH Do'Urden
  • Corp:SAK
Теоретически нагрузка на проц может иметь происхождение в не великом обьёме оперативки, сколько у вас SWAP?
  • 0
Всё выше означеное является исключительно моим личным мнением, я могу и буду ошибаться...
--------------------
Дыбра, животное в дебрях тундры, смесь бобра и выдры, враг кобры и пудры, бодро тибрит ядра кедра в ведрах, дробит добро в недрах...

#2263
ApostolRUS

ApostolRUS

    Clone Grade Delta

  • Tech III Pilots
  • PipPip
  • 230 сообщений
-43
  • EVE Ingame:-//-//-
  • Corp:Quinto Regimiento
  • Ally:Quinta columna
  • Client:Eng

Теоретически нагрузка на проц может иметь происхождение в не великом обьёме оперативки, сколько у вас SWAP?

6 Гигтаров, но он как видно по скрину особо не используеться, если не сказать что вообще
  • 0

Пользователь №: 231

Изображение


#2264
hash

hash

    Clone Grade Delta

  • Tech III Pilots
  • PipPip
  • 202 сообщений
8
  • EVE Ingame:HASH Do'Urden
  • Corp:SAK
Эммм, как-бы вам так сказать-то помягче...
1. Общие рекомендации объём Swap'a не более RAMx2.
2. Так немножко эти самые, да-же пустые, 6 гигобайт надо индексировать, на это нужен проц...
  • 0
Всё выше означеное является исключительно моим личным мнением, я могу и буду ошибаться...
--------------------
Дыбра, животное в дебрях тундры, смесь бобра и выдры, враг кобры и пудры, бодро тибрит ядра кедра в ведрах, дробит добро в недрах...

#2265
myst

myst

    Clone Grade Theta

  • Tech III Pilots
  • PipPipPipPip
  • 1192 сообщений
664
  • EVE Ingame:Shinah Myst
  • Corp:CEDRA
  • Client:Eng

2. Так немножко эти самые, да-же пустые, 6 гигобайт надо индексировать, на это нужен проц...

Глупости.

Отсюда вопрос, почему у вас EVE жрёт столько проца? ^_^

top(1) в руки, пусть смотрит, какой процесс жрёт CPU.

Сообщение отредактировал myst: 05 August 2010 - 0:26

  • 0

#2266
ApostolRUS

ApostolRUS

    Clone Grade Delta

  • Tech III Pilots
  • PipPip
  • 230 сообщений
-43
  • EVE Ingame:-//-//-
  • Corp:Quinto Regimiento
  • Ally:Quinta columna
  • Client:Eng

Глупости.


top(1) в руки, пусть смотрит, какой процесс жрёт CPU.

Изображение

Вот скрин с процесами и загрузкой ЦП, там видно что единственный процес который ЖРЕТ ресурсы это ExeFile.exe.

Что до файла подкачки, да действительно рекомендуют 2х от оперативки. Но это всего лиш рекомендация. В моем случае можно было вообще ешо убрать, по скольку он не используется.
  • 0

Пользователь №: 231

Изображение


#2267
myst

myst

    Clone Grade Theta

  • Tech III Pilots
  • PipPipPipPip
  • 1192 сообщений
664
  • EVE Ingame:Shinah Myst
  • Corp:CEDRA
  • Client:Eng

Вот скрин с процессами и загрузкой ЦП, там видно, что единственный процесс, который ЖРЕТ ресурсы -- это ExeFile.exe.

Меня смущает, что GNOME System Monitor жрёт больше, чем полEVE (34%). dmesg покажи.

Что до файла подкачки, да, действительно рекомендуют 2х от оперативки. Но это всего лишь рекомендация. В моем случае можно было вообще его убрать, поскольку он не используется.

Этим рекомендациям лет 20. Я бы 2 ГБ оставил в твоём случае.
  • 0

#2268
ApostolRUS

ApostolRUS

    Clone Grade Delta

  • Tech III Pilots
  • PipPip
  • 230 сообщений
-43
  • EVE Ingame:-//-//-
  • Corp:Quinto Regimiento
  • Ally:Quinta columna
  • Client:Eng

Меня смущает, что GNOME System Monitor жрёт больше, чем полEVE (34%). dmesg покажи.


Изображениеpc@pc-desktop:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-24-generic (buildd@vernadsky) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #38-Ubuntu SMP Mon Jul 5 09:22:14 UTC 2010 (Ubuntu 2.6.32-24.38-generic 2.6.32.15+drm33.5)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff90000 (usable)
[ 0.000000] BIOS-e820: 000000007ff90000 - 000000007ff9e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ff9e000 - 000000007ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x7ff90 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007ff90000 (usable)
[ 0.000000] modified: 000000007ff90000 - 000000007ff9e000 (ACPI data)
[ 0.000000] modified: 000000007ff9e000 - 000000007ffe0000 (ACPI NVS)
[ 0.000000] modified: 000000007ffe0000 - 0000000080000000 (reserved)
[ 0.000000] modified: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 37858000 - 37fef034
[ 0.000000] Allocated new RAMDISK: 008e0000 - 01077034
[ 0.000000] Move RAMDISK from 0000000037858000 - 0000000037fef033 to 008e0000 - 01077033
[ 0.000000] ACPI: RSDP 000fad20 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 7ff90000 00038 (v01 A_M_I_ OEMRSDT 08000914 MSFT 00000097)
[ 0.000000] ACPI: FACP 7ff90200 00081 (v01 A_M_I_ OEMFACP 08000914 MSFT 00000097)
[ 0.000000] ACPI: DSDT 7ff90590 0859A (v01 A0355 A0355000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 7ff9e000 00040
[ 0.000000] ACPI: APIC 7ff90390 00080 (v01 A_M_I_ OEMAPIC 08000914 MSFT 00000097)
[ 0.000000] ACPI: OEMB 7ff9e040 00066 (v01 A_M_I_ AMI_OEM 08000914 MSFT 00000097)
[ 0.000000] ACPI: HPET 7ff98b30 00038 (v01 A_M_I_ OEMHPET 08000914 MSFT 00000097)
[ 0.000000] ACPI: MCFG 7ff98b70 0003C (v01 A_M_I_ OEMMCFG 08000914 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1159MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008dbeb8] TEXT DATA BSS ==> [0000100000 - 00008dbeb8]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [00008dc000 - 00008df21c] BRK ==> [00008dc000 - 00008df21c]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #7 [00008e0000 - 0001077034] NEW RAMDISK ==> [00008e0000 - 0001077034]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007ff90
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007ff90
[ 0.000000] On node 0 totalpages: 524063
[ 0.000000] free_area_init_node: node 0, pgdat c0798780, node_mem_map c1079200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2320 pages used for memmap
[ 0.000000] HighMem zone: 294530 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7fb80000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36056 r0 d21288 u1048576
[ 0.000000] pcpu-alloc: s36056 r0 d21288 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519967
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=293000e6-346d-4072-89d7-6903d1de8d8e ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 10483200 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007ff90)
[ 0.000000] Memory: 2051488k/2096704k available (4679k kernel code, 43548k reserved, 2116k data, 660k init, 1187400k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a3000 - 0xc0848000 ( 660 kB)
[ 0.000000] .data : 0xc0591d23 - 0xc07a2e88 (2116 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0591d23 (4679 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3010.675 MHz processor.
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 6021.35 BogoMIPS (lpj=12042700)
[ 0.004027] Security Framework initialized
[ 0.004048] AppArmor: AppArmor initialized
[ 0.004058] Mount-cache hash table entries: 512
[ 0.008148] Initializing cgroup subsys ns
[ 0.008154] Initializing cgroup subsys cpuacct
[ 0.008160] Initializing cgroup subsys memory
[ 0.008170] Initializing cgroup subsys devices
[ 0.008172] Initializing cgroup subsys freezer
[ 0.008175] Initializing cgroup subsys net_cls
[ 0.008206] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.008210] CPU: L2 cache: 2048K
[ 0.008213] CPU: Physical Processor ID: 0
[ 0.008216] CPU: Processor Core ID: 0
[ 0.008221] mce: CPU supports 4 MCE banks
[ 0.008234] CPU0: Thermal monitoring enabled (TM1)
[ 0.008240] using mwait in idle threads.
[ 0.008248] Performance Events: no PMU driver, software events only.
[ 0.008256] Checking 'hlt' instruction... OK.
[ 0.028016] ACPI: Core revision 20090903
[ 0.044025] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.044034] ftrace: allocating 21780 entries in 43 pages
[ 0.048062] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.048386] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.091753] CPU0: Intel® Pentium® D CPU 3.00GHz stepping 04
[ 0.092001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.008000] CPU: L2 cache: 2048K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM1)
[ 0.176105] CPU1: Intel® Pentium® D CPU 3.00GHz stepping 04
[ 0.176122] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.180021] Brought up 2 CPUs
[ 0.180025] Total of 2 processors activated (12042.75 BogoMIPS).
[ 0.180616] CPU0 attaching sched-domain:
[ 0.180621] domain 0: span 0-1 level CPU
[ 0.180624] groups: 0 1
[ 0.180632] CPU1 attaching sched-domain:
[ 0.180635] domain 0: span 0-1 level CPU
[ 0.180638] groups: 1 0
[ 0.180730] devtmpfs: initialized
[ 0.180730] regulator: core version 0.5
[ 0.180730] Time: 18:36:36 Date: 08/05/10
[ 0.180730] NET: Registered protocol family 16
[ 0.180730] Trying to unpack rootfs image as initramfs...
[ 0.180730] EISA bus registered
[ 0.180730] ACPI: bus type pci registered
[ 0.180730] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.180730] PCI: Not using MMCONFIG.
[ 0.180730] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=4
[ 0.180730] PCI: Using configuration type 1 for base access
[ 0.188140] bio: create slab <bio-0> at 0
[ 0.189301] ACPI: EC: Look up EC in DSDT
[ 0.194466] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.206725] ACPI: Interpreter enabled
[ 0.206743] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.206778] ACPI: Using IOAPIC for interrupt routing
[ 0.206840] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.212269] PCI: MCFG area at f0000000 reserved in ACPI motherboard resources
[ 0.212273] PCI: Using MMCONFIG for extended config space
[ 0.222152] ACPI Warning: Incorrect checksum in table [OEMB] - BF, should be B2 (20090903/tbutils-314)
[ 0.222307] ACPI: No dock devices found.
[ 0.222440] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.222589] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.222594] pci 0000:00:01.0: PME# disabled
[ 0.222677] pci 0000:00:1b.0: reg 10 64bit mmio: [0xdbef8000-0xdbefbfff]
[ 0.222730] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.222735] pci 0000:00:1b.0: PME# disabled
[ 0.222815] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.222820] pci 0000:00:1c.0: PME# disabled
[ 0.222902] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.222907] pci 0000:00:1c.3: PME# disabled
[ 0.222967] pci 0000:00:1d.0: reg 20 io port: [0x8000-0x801f]
[ 0.223026] pci 0000:00:1d.1: reg 20 io port: [0x8400-0x841f]
[ 0.223088] pci 0000:00:1d.2: reg 20 io port: [0x8800-0x881f]
[ 0.223147] pci 0000:00:1d.3: reg 20 io port: [0x9000-0x901f]
[ 0.223213] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdbeffc00-0xdbefffff]
[ 0.223273] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.223278] pci 0000:00:1d.7: PME# disabled
[ 0.223429] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.223434] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.223440] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
[ 0.223491] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.223499] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.223507] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.223515] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.223524] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[ 0.223577] pci 0000:00:1f.2: reg 10 io port: [0xa800-0xa807]
[ 0.223585] pci 0000:00:1f.2: reg 14 io port: [0xa400-0xa403]
[ 0.223592] pci 0000:00:1f.2: reg 18 io port: [0xa000-0xa007]
[ 0.223599] pci 0000:00:1f.2: reg 1c io port: [0x9800-0x9803]
[ 0.223607] pci 0000:00:1f.2: reg 20 io port: [0x9400-0x940f]
[ 0.223637] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.223642] pci 0000:00:1f.2: PME# disabled
[ 0.223695] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.223766] pci 0000:04:00.0: reg 10 32bit mmio: [0xdf000000-0xdfffffff]
[ 0.223778] pci 0000:04:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.223790] pci 0000:04:00.0: reg 1c 64bit mmio: [0xdc000000-0xddffffff]
[ 0.223798] pci 0000:04:00.0: reg 24 io port: [0xe800-0xe87f]
[ 0.223806] pci 0000:04:00.0: reg 30 32bit mmio pref: [0xdef80000-0xdeffffff]
[ 0.223889] pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
[ 0.223894] pci 0000:00:01.0: bridge 32bit mmio: [0xdc000000-0xdfffffff]
[ 0.223900] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.223951] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff]
[ 0.224033] pci 0000:02:00.0: reg 10 io port: [0xc800-0xc8ff]
[ 0.224060] pci 0000:02:00.0: reg 18 64bit mmio: [0xdbfff000-0xdbffffff]
[ 0.224085] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xdbfe0000-0xdbfeffff]
[ 0.224141] pci 0000:02:00.0: supports D1 D2
[ 0.224144] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.224150] pci 0000:02:00.0: PME# disabled
[ 0.224217] pci 0000:00:1c.3: bridge io port: [0xc000-0xcfff]
[ 0.224223] pci 0000:00:1c.3: bridge 32bit mmio: [0xdbf00000-0xdbffffff]
[ 0.224286] pci 0000:00:1e.0: transparent bridge
[ 0.224292] pci 0000:00:1e.0: bridge io port: [0xb000-0xbfff]
[ 0.224320] pci_bus 0000:00: on NUMA node 0
[ 0.224326] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.224495] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.224574] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.224714] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.224799] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.229340] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.229488] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.229636] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.229782] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.229928] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.230073] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.230220] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.230368] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.230518] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.230523] vgaarb: loaded
[ 0.230687] SCSI subsystem initialized
[ 0.230780] libata version 3.00 loaded.
[ 0.230874] usbcore: registered new interface driver usbfs
[ 0.230900] usbcore: registered new interface driver hub
[ 0.230937] usbcore: registered new device driver usb
[ 0.231116] ACPI: WMI: Mapper loaded
[ 0.231119] PCI: Using ACPI for IRQ routing
[ 0.231307] NetLabel: Initializing
[ 0.231310] NetLabel: domain hash size = 128
[ 0.231312] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.231328] NetLabel: unlabeled traffic allowed by default
[ 0.231375] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.231382] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.236247] Switching to clocksource tsc
[ 0.238657] AppArmor: AppArmor Filesystem Enabled
[ 0.238671] pnp: PnP ACPI init
[ 0.238682] ACPI: bus type pnp registered
[ 0.244724] pnp: PnP ACPI: found 16 devices
[ 0.244728] ACPI: ACPI bus type pnp unregistered
[ 0.244732] PnPBIOS: Disabled by ACPI PNP
[ 0.244746] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 0.244759] system 00:08: ioport range 0x290-0x297 has been reserved
[ 0.244769] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 0.244774] system 00:09: ioport range 0x800-0x87f has been reserved
[ 0.244778] system 00:09: ioport range 0x480-0x4bf has been reserved
[ 0.244781] system 00:09: ioport range 0x900-0x91f has been reserved
[ 0.244786] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.244789] system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.244793] system 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 0.244797] system 00:09: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.244807] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.244812] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.244822] system 00:0e: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.244832] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 0.244837] system 00:0f: iomem range 0xc0000-0xdffff could not be reserved
[ 0.244840] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 0.244844] system 00:0f: iomem range 0x100000-0x7fffffff could not be reserved
[ 0.279631] pci 0000:00:01.0: PCI bridge, secondary bus 0000:04
[ 0.279636] pci 0000:00:01.0: IO window: 0xe000-0xefff
[ 0.279642] pci 0000:00:01.0: MEM window: 0xdc000000-0xdfffffff
[ 0.279647] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
[ 0.279653] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
[ 0.279657] pci 0000:00:1c.0: IO window: 0xd000-0xdfff
[ 0.279664] pci 0000:00:1c.0: MEM window: 0x80000000-0x801fffff
[ 0.279669] pci 0000:00:1c.0: PREFETCH window: 0x00000080200000-0x000000803fffff
[ 0.279676] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:02
[ 0.279681] pci 0000:00:1c.3: IO window: 0xc000-0xcfff
[ 0.279687] pci 0000:00:1c.3: MEM window: 0xdbf00000-0xdbffffff
[ 0.279691] pci 0000:00:1c.3: PREFETCH window: disabled
[ 0.279699] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.279703] pci 0000:00:1e.0: IO window: 0xb000-0xbfff
[ 0.279709] pci 0000:00:1e.0: MEM window: disabled
[ 0.279713] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.279729] alloc irq_desc for 16 on node -1
[ 0.279731] alloc kstat_irqs on node -1
[ 0.279738] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.279744] pci 0000:00:01.0: setting latency timer to 64
[ 0.279756] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.279761] pci 0000:00:1c.0: setting latency timer to 64
[ 0.279771] alloc irq_desc for 19 on node -1
[ 0.279773] alloc kstat_irqs on node -1
[ 0.279778] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.279784] pci 0000:00:1c.3: setting latency timer to 64
[ 0.279793] pci 0000:00:1e.0: setting latency timer to 64
[ 0.279799] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.279804] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.279807] pci_bus 0000:04: resource 0 io: [0xe000-0xefff]
[ 0.279811] pci_bus 0000:04: resource 1 mem: [0xdc000000-0xdfffffff]
[ 0.279814] pci_bus 0000:04: resource 2 pref mem [0xe0000000-0xefffffff]
[ 0.279817] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
[ 0.279820] pci_bus 0000:03: resource 1 mem: [0x80000000-0x801fffff]
[ 0.279823] pci_bus 0000:03: resource 2 pref mem [0x80200000-0x803fffff]
[ 0.279827] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
[ 0.279830] pci_bus 0000:02: resource 1 mem: [0xdbf00000-0xdbffffff]
[ 0.279834] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
[ 0.279838] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.279841] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[ 0.279888] NET: Registered protocol family 2
[ 0.280017] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.280435] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.281022] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.281313] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.281316] TCP reno registered
[ 0.281411] NET: Registered protocol family 1
[ 0.281546] pci 0000:04:00.0: Boot video device
[ 0.281764] cpufreq-nforce2: No nForce2 chipset.
[ 0.281801] Scanning for low memory corruption every 60 seconds
[ 0.281942] audit: initializing netlink socket (disabled)
[ 0.281953] type=2000 audit(1281033396.279:1): initialized
[ 0.290831] highmem bounce pool size: 64 pages
[ 0.290839] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.292800] VFS: Disk quotas dquot_6.5.2
[ 0.292882] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.293695] fuse init (API version 7.13)
[ 0.293817] msgmni has been set to 1690
[ 0.294114] alg: No test for stdrng (krng)
[ 0.294193] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.294197] io scheduler noop registered
[ 0.294199] io scheduler anticipatory registered
[ 0.294202] io scheduler deadline registered
[ 0.294257] io scheduler cfq registered (default)
[ 0.294427] alloc irq_desc for 24 on node -1
[ 0.294430] alloc kstat_irqs on node -1
[ 0.294442] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.294450] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.294583] alloc irq_desc for 25 on node -1
[ 0.294586] alloc kstat_irqs on node -1
[ 0.294596] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.294606] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.294755] alloc irq_desc for 26 on node -1
[ 0.294758] alloc kstat_irqs on node -1
[ 0.294767] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X
[ 0.294777] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.294879] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.294963] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.295099] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.295104] ACPI: Power Button [PWRB]
[ 0.295177] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.295181] ACPI: Power Button [PWRF]
[ 0.295973] ACPI: SSDT 7ff9e0b0 001C6 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.296354] processor LNXCPU:00: registered as cooling_device0
[ 0.296785] ACPI: SSDT 7ff9e280 0013A (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.297516] processor LNXCPU:01: registered as cooling_device1
[ 0.303301] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.303411] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.303964] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.305417] brd: module loaded
[ 0.306055] loop: module loaded
[ 0.306165] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.306285] ata_piix 0000:00:1f.1: version 2.13
[ 0.306306] alloc irq_desc for 22 on node -1
[ 0.306309] alloc kstat_irqs on node -1
[ 0.306318] ata_piix 0000:00:1f.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.306368] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.306447] isapnp: Scanning for PnP cards...
[ 0.355399] scsi0 : ata_piix
[ 0.398946] scsi1 : ata_piix
[ 0.400850] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.400854] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.400882] alloc irq_desc for 23 on node -1
[ 0.400886] alloc kstat_irqs on node -1
[ 0.400893] ata_piix 0000:00:1f.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[ 0.400899] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.400942] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.424469] Freeing initrd memory: 7772k freed
[ 0.428761] scsi2 : ata_piix
[ 0.428866] scsi3 : ata_piix
[ 0.428925] ata3: SATA max UDMA/133 cmd 0xa800 ctl 0xa400 bmdma 0x9400 irq 23
[ 0.428929] ata4: SATA max UDMA/133 cmd 0xa000 ctl 0x9800 bmdma 0x9408 irq 23
[ 0.429433] Fixed MDIO Bus: probed
[ 0.429484] PPP generic driver version 2.4.2
[ 0.429569] tun: Universal TUN/TAP device driver, 1.6
[ 0.429572] tun: © 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.429706] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.429738] alloc irq_desc for 20 on node -1
[ 0.429741] alloc kstat_irqs on node -1
[ 0.429750] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.429770] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.429774] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.429820] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.429844] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.429856] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.433735] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 0.433858] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdbeffc00
[ 0.447176] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.447306] usb usb1: configuration #1 chosen from 1 choice
[ 0.447347] hub 1-0:1.0: USB hub found
[ 0.447357] hub 1-0:1.0: 8 ports detected
[ 0.447446] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.447466] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.447510] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.447520] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.447524] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.447566] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.447592] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00008000
[ 0.447705] usb usb2: configuration #1 chosen from 1 choice
[ 0.447745] hub 2-0:1.0: USB hub found
[ 0.447755] hub 2-0:1.0: 2 ports detected
[ 0.447814] alloc irq_desc for 17 on node -1
[ 0.447817] alloc kstat_irqs on node -1
[ 0.447823] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.447830] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.447834] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.447877] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.447910] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00008400
[ 0.448023] usb usb3: configuration #1 chosen from 1 choice
[ 0.448061] hub 3-0:1.0: USB hub found
[ 0.448070] hub 3-0:1.0: 2 ports detected
[ 0.448126] alloc irq_desc for 18 on node -1
[ 0.448129] alloc kstat_irqs on node -1
[ 0.448135] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.448142] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.448146] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.448187] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.448220] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00008800
[ 0.448338] usb usb4: configuration #1 chosen from 1 choice
[ 0.448373] hub 4-0:1.0: USB hub found
[ 0.448382] hub 4-0:1.0: 2 ports detected
[ 0.448448] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.448456] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.448460] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.448507] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.448542] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00009000
[ 0.448656] usb usb5: configuration #1 chosen from 1 choice
[ 0.448698] hub 5-0:1.0: USB hub found
[ 0.448710] hub 5-0:1.0: 2 ports detected
[ 0.448836] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.448840] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.449361] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.449499] mice: PS/2 mouse device common for all mice
[ 0.449651] rtc_cmos 00:03: RTC can wake from S4
[ 0.449703] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.449732] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.449871] device-mapper: uevent: version 1.0.3
[ 0.449995] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.450085] device-mapper: multipath: version 1.1.0 loaded
[ 0.450089] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.450233] EISA: Probing bus 0 at eisa.0
[ 0.450262] Cannot allocate resource for EISA slot 8
[ 0.450264] EISA: Detected 0 cards.
[ 0.450360] cpuidle: using governor ladder
[ 0.450364] cpuidle: using governor menu
[ 0.450977] TCP cubic registered
[ 0.451149] NET: Registered protocol family 10
[ 0.451840] lo: Disabled Privacy Extensions
[ 0.452302] NET: Registered protocol family 17
[ 0.452899] Using IPI No-Shortcut mode
[ 0.452997] PM: Resume from disk failed.
[ 0.453018] registered taskstats version 1
[ 0.453365] Magic number: 6:876:644
[ 0.453448] rtc_cmos 00:03: setting system clock to 2010-08-05 18:36:36 UTC (1281033396)
[ 0.453452] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.453454] EDD information not available.
[ 0.469151] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.640881] ata1.00: ATAPI: TSSTcorp CDDVDW SH-S222A, SB02, max UDMA/66
[ 0.641017] ata3.00: ATA-6: WDC WD800JD-75JNA0, 05.01C05, max UDMA/100
[ 0.641021] ata3.00: 156250000 sectors, multi 16: LBA
[ 0.684656] isapnp: No Plug & Play device found
[ 0.685133] ata4.01: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7
[ 0.685137] ata4.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.691830] ata1.00: configured for UDMA/66
[ 0.691920] ata3.00: configured for UDMA/100
[ 0.699704] ata4.01: configured for UDMA/133
[ 0.700776] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S222A SB02 PQ: 0 ANSI: 5
[ 0.704489] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.704495] Uniform CD-ROM driver Revision: 3.20
[ 0.704624] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.704692] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 0.704855] scsi 2:0:0:0: Direct-Access ATA WDC WD800JD-75JN 05.0 PQ: 0 ANSI: 5
[ 0.705002] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 0.705145] scsi 3:0:1:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5
[ 0.705292] sd 3:0:1:0: Attached scsi generic sg2 type 0
[ 0.705381] sd 3:0:1:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 0.705422] sd 2:0:0:0: [sda] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 0.705542] sd 3:0:1:0: [sdb] Write Protect is off
[ 0.705546] sd 3:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.705566] sd 2:0:0:0: [sda] Write Protect is off
[ 0.705570] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.705624] sd 3:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.705685] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.705978] sdb:
[ 0.706069] sda: sdb1 sdb2 < sda1
[ 0.735915] sd 2:0:0:0: [sda] Attached SCSI disk
[ 0.751797] sdb5 sdb6 sdb7 >
[ 0.768541] sd 3:0:1:0: [sdb] Attached SCSI disk
[ 0.768557] Freeing unused kernel memory: 660k freed
[ 0.769036] Write protecting the kernel text: 4680k
[ 0.769091] Write protecting the kernel read-only data: 1840k
[ 0.792831] udev: starting version 151
[ 0.926361] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.926387] r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.926441] r8169 0000:02:00.0: setting latency timer to 64
[ 0.926505] alloc irq_desc for 27 on node -1
[ 0.926508] alloc kstat_irqs on node -1
[ 0.926526] r8169 0000:02:00.0: irq 27 for MSI/MSI-X
[ 0.927495] eth0: RTL8168b/8111b at 0xf8066000, 00:17:31:e2:d2:11, XID 18000000 IRQ 27
[ 0.930418] Floppy drive(s): fd0 is 1.44M
[ 0.953157] FDC 0 is a post-1991 82077
[ 1.080020] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 1.273072] usb 3-1: configuration #1 chosen from 1 choice
[ 1.294300] usbcore: registered new interface driver hiddev
[ 1.576018] usb 3-2: new full speed USB device using uhci_hcd and address 3
[ 1.718908] EXT4-fs (sdb6): mounted filesystem with ordered data mode
[ 1.742071] usb 3-2: configuration #1 chosen from 1 choice
[ 3.118124] generic-usb 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.10 Device [American Power Conversion Smart-UPS 1000 FW:652.12.I USB FW:4.2] on usb-0000:00:1d.1-1/input0
[ 3.141209] input: A4Tech USB Full Speed as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input4
[ 3.141321] generic-usb 0003:09DA:8090.0002: input,hidraw1: USB HID v1.11 Mouse [A4Tech USB Full Speed] on usb-0000:00:1d.1-2/input0
[ 3.178483] input: A4Tech USB Full Speed as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input5
[ 3.178622] generic-usb 0003:09DA:8090.0003: input,hiddev97,hidraw2: USB HID v1.11 Keyboard [A4Tech USB Full Speed] on usb-0000:00:1d.1-2/input1
[ 3.178747] usbcore: registered new interface driver usbhid
[ 3.178754] usbhid: v2.6:USB HID core driver
[ 14.142337] udev: starting version 151
[ 14.142578] Adding 6036472k swap on /dev/sdb5. Priority:-1 extents:1 across:6036472k
[ 14.252707] Linux agpgart interface v0.103
[ 14.342743] lp: driver loaded but no devices found
[ 14.427859] intel_rng: FWH not detected
[ 14.678093] type=1505 audit(1281022610.722:2): operation="profile_load" pid=551 name="/sbin/dhclient3"
[ 14.678781] type=1505 audit(1281022610.722:3): operation="profile_load" pid=551 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 14.679148] type=1505 audit(1281022610.722:4): operation="profile_load" pid=551 name="/usr/lib/connman/scripts/dhclient-script"
[ 15.225377] EXT4-fs (sdb7): mounted filesystem with ordered data mode
[ 16.114990] nvidia: module license 'NVIDIA' taints kernel.
[ 16.114995] Disabling lock debugging due to kernel taint
[ 17.205691] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 17.205722] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 17.211547] parport_pc 00:07: reported by Plug and Play ACPI
[ 17.211661] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 17.316392] nvidia 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.316402] nvidia 0000:04:00.0: setting latency timer to 64
[ 17.316409] vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 17.317702] NVRM: loading NVIDIA UNIX x86 Kernel Module 256.35 Wed Jun 16 18:57:17 PDT 2010
[ 17.320982] ppdev: user-space parallel port driver
[ 17.364609] lp0: using parport0 (interrupt-driven).
[ 17.447890] r8169: eth0: link up
[ 17.447899] r8169: eth0: link up
[ 17.465170] type=1505 audit(1281022613.510:5): operation="profile_load" pid=727 name="/usr/share/gdm/guest-session/Xsession"
[ 17.467314] type=1505 audit(1281022613.510:6): operation="profile_replace" pid=728 name="/sbin/dhclient3"
[ 17.468014] type=1505 audit(1281022613.514:7): operation="profile_replace" pid=728 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 17.468620] type=1505 audit(1281022613.514:8): operation="profile_replace" pid=728 name="/usr/lib/connman/scripts/dhclient-script"
[ 17.511985] type=1505 audit(1281022613.557:9): operation="profile_load" pid=729 name="/usr/bin/evince"
[ 17.521170] type=1505 audit(1281022613.566:10): operation="profile_load" pid=729 name="/usr/bin/evince-previewer"
[ 17.526547] type=1505 audit(1281022613.570:11): operation="profile_load" pid=729 name="/usr/bin/evince-thumbnailer"
[ 17.665579] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 18.272839] CPU0 attaching NULL sched-domain.
[ 18.272847] CPU1 attaching NULL sched-domain.
[ 18.296125] CPU0 attaching sched-domain:
[ 18.296131] domain 0: span 0-1 level CPU
[ 18.296135] groups: 0 1
[ 18.296142] CPU1 attaching sched-domain:
[ 18.296145] domain 0: span 0-1 level CPU
[ 18.296149] groups: 1 0
[ 23.010769] CPU0 attaching NULL sched-domain.
[ 23.010777] CPU1 attaching NULL sched-domain.
[ 23.036087] CPU0 attaching sched-domain:
[ 23.036092] domain 0: span 0-1 level CPU
[ 23.036096] groups: 0 1
[ 23.036104] CPU1 attaching sched-domain:
[ 23.036107] domain 0: span 0-1 level CPU
[ 23.036110] groups: 1 0
[ 27.960007] eth0: no IPv6 routers present

Изображениеdmesg из системного журнала
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-24-generic (buildd@vernadsky) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #38-Ubuntu SMP Mon Jul 5 09:22:14 UTC 2010 (Ubuntu 2.6.32-24.38-generic 2.6.32.15+drm33.5)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff90000 (usable)
[ 0.000000] BIOS-e820: 000000007ff90000 - 000000007ff9e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ff9e000 - 000000007ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x7ff90 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007ff90000 (usable)
[ 0.000000] modified: 000000007ff90000 - 000000007ff9e000 (ACPI data)
[ 0.000000] modified: 000000007ff9e000 - 000000007ffe0000 (ACPI NVS)
[ 0.000000] modified: 000000007ffe0000 - 0000000080000000 (reserved)
[ 0.000000] modified: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 37858000 - 37fef034
[ 0.000000] Allocated new RAMDISK: 008e0000 - 01077034
[ 0.000000] Move RAMDISK from 0000000037858000 - 0000000037fef033 to 008e0000 - 01077033
[ 0.000000] ACPI: RSDP 000fad20 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 7ff90000 00038 (v01 A_M_I_ OEMRSDT 08000914 MSFT 00000097)
[ 0.000000] ACPI: FACP 7ff90200 00081 (v01 A_M_I_ OEMFACP 08000914 MSFT 00000097)
[ 0.000000] ACPI: DSDT 7ff90590 0859A (v01 A0355 A0355000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 7ff9e000 00040
[ 0.000000] ACPI: APIC 7ff90390 00080 (v01 A_M_I_ OEMAPIC 08000914 MSFT 00000097)
[ 0.000000] ACPI: OEMB 7ff9e040 00066 (v01 A_M_I_ AMI_OEM 08000914 MSFT 00000097)
[ 0.000000] ACPI: HPET 7ff98b30 00038 (v01 A_M_I_ OEMHPET 08000914 MSFT 00000097)
[ 0.000000] ACPI: MCFG 7ff98b70 0003C (v01 A_M_I_ OEMMCFG 08000914 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1159MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008dbeb8] TEXT DATA BSS ==> [0000100000 - 00008dbeb8]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [00008dc000 - 00008df21c] BRK ==> [00008dc000 - 00008df21c]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #7 [00008e0000 - 0001077034] NEW RAMDISK ==> [00008e0000 - 0001077034]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007ff90
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007ff90
[ 0.000000] On node 0 totalpages: 524063
[ 0.000000] free_area_init_node: node 0, pgdat c0798780, node_mem_map c1079200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2320 pages used for memmap
[ 0.000000] HighMem zone: 294530 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7fb80000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36056 r0 d21288 u1048576
[ 0.000000] pcpu-alloc: s36056 r0 d21288 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519967
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=293000e6-346d-4072-89d7-6903d1de8d8e ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 10483200 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007ff90)
[ 0.000000] Memory: 2051488k/2096704k available (4679k kernel code, 43548k reserved, 2116k data, 660k init, 1187400k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a3000 - 0xc0848000 ( 660 kB)
[ 0.000000] .data : 0xc0591d23 - 0xc07a2e88 (2116 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0591d23 (4679 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3010.675 MHz processor.
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 6021.35 BogoMIPS (lpj=12042700)
[ 0.004027] Security Framework initialized
[ 0.004048] AppArmor: AppArmor initialized
[ 0.004058] Mount-cache hash table entries: 512
[ 0.008148] Initializing cgroup subsys ns
[ 0.008154] Initializing cgroup subsys cpuacct
[ 0.008160] Initializing cgroup subsys memory
[ 0.008170] Initializing cgroup subsys devices
[ 0.008172] Initializing cgroup subsys freezer
[ 0.008175] Initializing cgroup subsys net_cls
[ 0.008206] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.008210] CPU: L2 cache: 2048K
[ 0.008213] CPU: Physical Processor ID: 0
[ 0.008216] CPU: Processor Core ID: 0
[ 0.008221] mce: CPU supports 4 MCE banks
[ 0.008234] CPU0: Thermal monitoring enabled (TM1)
[ 0.008240] using mwait in idle threads.
[ 0.008248] Performance Events: no PMU driver, software events only.
[ 0.008256] Checking 'hlt' instruction... OK.
[ 0.028016] ACPI: Core revision 20090903
[ 0.044025] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.044034] ftrace: allocating 21780 entries in 43 pages
[ 0.048062] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.048386] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.091753] CPU0: Intel® Pentium® D CPU 3.00GHz stepping 04
[ 0.092001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.008000] CPU: L2 cache: 2048K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM1)
[ 0.176105] CPU1: Intel® Pentium® D CPU 3.00GHz stepping 04
[ 0.176122] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.180021] Brought up 2 CPUs
[ 0.180025] Total of 2 processors activated (12042.75 BogoMIPS).
[ 0.180616] CPU0 attaching sched-domain:
[ 0.180621] domain 0: span 0-1 level CPU
[ 0.180624] groups: 0 1
[ 0.180632] CPU1 attaching sched-domain:
[ 0.180635] domain 0: span 0-1 level CPU
[ 0.180638] groups: 1 0
[ 0.180730] devtmpfs: initialized
[ 0.180730] regulator: core version 0.5
[ 0.180730] Time: 18:36:36 Date: 08/05/10
[ 0.180730] NET: Registered protocol family 16
[ 0.180730] Trying to unpack rootfs image as initramfs...
[ 0.180730] EISA bus registered
[ 0.180730] ACPI: bus type pci registered
[ 0.180730] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.180730] PCI: Not using MMCONFIG.
[ 0.180730] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=4
[ 0.180730] PCI: Using configuration type 1 for base access
[ 0.188140] bio: create slab <bio-0> at 0
[ 0.189301] ACPI: EC: Look up EC in DSDT
[ 0.194466] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.206725] ACPI: Interpreter enabled
[ 0.206743] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.206778] ACPI: Using IOAPIC for interrupt routing
[ 0.206840] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.212269] PCI: MCFG area at f0000000 reserved in ACPI motherboard resources
[ 0.212273] PCI: Using MMCONFIG for extended config space
[ 0.222152] ACPI Warning: Incorrect checksum in table [OEMB] - BF, should be B2 (20090903/tbutils-314)
[ 0.222307] ACPI: No dock devices found.
[ 0.222440] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.222589] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.222594] pci 0000:00:01.0: PME# disabled
[ 0.222677] pci 0000:00:1b.0: reg 10 64bit mmio: [0xdbef8000-0xdbefbfff]
[ 0.222730] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.222735] pci 0000:00:1b.0: PME# disabled
[ 0.222815] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.222820] pci 0000:00:1c.0: PME# disabled
[ 0.222902] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.222907] pci 0000:00:1c.3: PME# disabled
[ 0.222967] pci 0000:00:1d.0: reg 20 io port: [0x8000-0x801f]
[ 0.223026] pci 0000:00:1d.1: reg 20 io port: [0x8400-0x841f]
[ 0.223088] pci 0000:00:1d.2: reg 20 io port: [0x8800-0x881f]
[ 0.223147] pci 0000:00:1d.3: reg 20 io port: [0x9000-0x901f]
[ 0.223213] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdbeffc00-0xdbefffff]
[ 0.223273] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.223278] pci 0000:00:1d.7: PME# disabled
[ 0.223429] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.223434] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.223440] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
[ 0.223491] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.223499] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.223507] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.223515] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.223524] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[ 0.223577] pci 0000:00:1f.2: reg 10 io port: [0xa800-0xa807]
[ 0.223585] pci 0000:00:1f.2: reg 14 io port: [0xa400-0xa403]
[ 0.223592] pci 0000:00:1f.2: reg 18 io port: [0xa000-0xa007]
[ 0.223599] pci 0000:00:1f.2: reg 1c io port: [0x9800-0x9803]
[ 0.223607] pci 0000:00:1f.2: reg 20 io port: [0x9400-0x940f]
[ 0.223637] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.223642] pci 0000:00:1f.2: PME# disabled
[ 0.223695] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.223766] pci 0000:04:00.0: reg 10 32bit mmio: [0xdf000000-0xdfffffff]
[ 0.223778] pci 0000:04:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.223790] pci 0000:04:00.0: reg 1c 64bit mmio: [0xdc000000-0xddffffff]
[ 0.223798] pci 0000:04:00.0: reg 24 io port: [0xe800-0xe87f]
[ 0.223806] pci 0000:04:00.0: reg 30 32bit mmio pref: [0xdef80000-0xdeffffff]
[ 0.223889] pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
[ 0.223894] pci 0000:00:01.0: bridge 32bit mmio: [0xdc000000-0xdfffffff]
[ 0.223900] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.223951] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff]
[ 0.224033] pci 0000:02:00.0: reg 10 io port: [0xc800-0xc8ff]
[ 0.224060] pci 0000:02:00.0: reg 18 64bit mmio: [0xdbfff000-0xdbffffff]
[ 0.224085] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xdbfe0000-0xdbfeffff]
[ 0.224141] pci 0000:02:00.0: supports D1 D2
[ 0.224144] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.224150] pci 0000:02:00.0: PME# disabled
[ 0.224217] pci 0000:00:1c.3: bridge io port: [0xc000-0xcfff]
[ 0.224223] pci 0000:00:1c.3: bridge 32bit mmio: [0xdbf00000-0xdbffffff]
[ 0.224286] pci 0000:00:1e.0: transparent bridge
[ 0.224292] pci 0000:00:1e.0: bridge io port: [0xb000-0xbfff]
[ 0.224320] pci_bus 0000:00: on NUMA node 0
[ 0.224326] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.224495] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.224574] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.224714] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.224799] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.229340] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.229488] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.229636] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.229782] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.229928] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.230073] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.230220] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.230368] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.230518] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.230523] vgaarb: loaded
[ 0.230687] SCSI subsystem initialized
[ 0.230780] libata version 3.00 loaded.
[ 0.230874] usbcore: registered new interface driver usbfs
[ 0.230900] usbcore: registered new interface driver hub
[ 0.230937] usbcore: registered new device driver usb
[ 0.231116] ACPI: WMI: Mapper loaded
[ 0.231119] PCI: Using ACPI for IRQ routing
[ 0.231307] NetLabel: Initializing
[ 0.231310] NetLabel: domain hash size = 128
[ 0.231312] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.231328] NetLabel: unlabeled traffic allowed by default
[ 0.231375] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.231382] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.236247] Switching to clocksource tsc
[ 0.238657] AppArmor: AppArmor Filesystem Enabled
[ 0.238671] pnp: PnP ACPI init
[ 0.238682] ACPI: bus type pnp registered
[ 0.244724] pnp: PnP ACPI: found 16 devices
[ 0.244728] ACPI: ACPI bus type pnp unregistered
[ 0.244732] PnPBIOS: Disabled by ACPI PNP
[ 0.244746] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 0.244759] system 00:08: ioport range 0x290-0x297 has been reserved
[ 0.244769] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 0.244774] system 00:09: ioport range 0x800-0x87f has been reserved
[ 0.244778] system 00:09: ioport range 0x480-0x4bf has been reserved
[ 0.244781] system 00:09: ioport range 0x900-0x91f has been reserved
[ 0.244786] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.244789] system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.244793] system 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 0.244797] system 00:09: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.244807] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.244812] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.244822] system 00:0e: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.244832] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 0.244837] system 00:0f: iomem range 0xc0000-0xdffff could not be reserved
[ 0.244840] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 0.244844] system 00:0f: iomem range 0x100000-0x7fffffff could not be reserved
[ 0.279631] pci 0000:00:01.0: PCI bridge, secondary bus 0000:04
[ 0.279636] pci 0000:00:01.0: IO window: 0xe000-0xefff
[ 0.279642] pci 0000:00:01.0: MEM window: 0xdc000000-0xdfffffff
[ 0.279647] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
[ 0.279653] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
[ 0.279657] pci 0000:00:1c.0: IO window: 0xd000-0xdfff
[ 0.279664] pci 0000:00:1c.0: MEM window: 0x80000000-0x801fffff
[ 0.279669] pci 0000:00:1c.0: PREFETCH window: 0x00000080200000-0x000000803fffff
[ 0.279676] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:02
[ 0.279681] pci 0000:00:1c.3: IO window: 0xc000-0xcfff
[ 0.279687] pci 0000:00:1c.3: MEM window: 0xdbf00000-0xdbffffff
[ 0.279691] pci 0000:00:1c.3: PREFETCH window: disabled
[ 0.279699] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.279703] pci 0000:00:1e.0: IO window: 0xb000-0xbfff
[ 0.279709] pci 0000:00:1e.0: MEM window: disabled
[ 0.279713] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.279729] alloc irq_desc for 16 on node -1
[ 0.279731] alloc kstat_irqs on node -1
[ 0.279738] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.279744] pci 0000:00:01.0: setting latency timer to 64
[ 0.279756] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.279761] pci 0000:00:1c.0: setting latency timer to 64
[ 0.279771] alloc irq_desc for 19 on node -1
[ 0.279773] alloc kstat_irqs on node -1
[ 0.279778] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.279784] pci 0000:00:1c.3: setting latency timer to 64
[ 0.279793] pci 0000:00:1e.0: setting latency timer to 64
[ 0.279799] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.279804] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.279807] pci_bus 0000:04: resource 0 io: [0xe000-0xefff]
[ 0.279811] pci_bus 0000:04: resource 1 mem: [0xdc000000-0xdfffffff]
[ 0.279814] pci_bus 0000:04: resource 2 pref mem [0xe0000000-0xefffffff]
[ 0.279817] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
[ 0.279820] pci_bus 0000:03: resource 1 mem: [0x80000000-0x801fffff]
[ 0.279823] pci_bus 0000:03: resource 2 pref mem [0x80200000-0x803fffff]
[ 0.279827] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
[ 0.279830] pci_bus 0000:02: resource 1 mem: [0xdbf00000-0xdbffffff]
[ 0.279834] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
[ 0.279838] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.279841] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[ 0.279888] NET: Registered protocol family 2
[ 0.280017] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.280435] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.281022] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.281313] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.281316] TCP reno registered
[ 0.281411] NET: Registered protocol family 1
[ 0.281546] pci 0000:04:00.0: Boot video device
[ 0.281764] cpufreq-nforce2: No nForce2 chipset.
[ 0.281801] Scanning for low memory corruption every 60 seconds
[ 0.281942] audit: initializing netlink socket (disabled)
[ 0.281953] type=2000 audit(1281033396.279:1): initialized
[ 0.290831] highmem bounce pool size: 64 pages
[ 0.290839] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.292800] VFS: Disk quotas dquot_6.5.2
[ 0.292882] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.293695] fuse init (API version 7.13)
[ 0.293817] msgmni has been set to 1690
[ 0.294114] alg: No test for stdrng (krng)
[ 0.294193] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.294197] io scheduler noop registered
[ 0.294199] io scheduler anticipatory registered
[ 0.294202] io scheduler deadline registered
[ 0.294257] io scheduler cfq registered (default)
[ 0.294427] alloc irq_desc for 24 on node -1
[ 0.294430] alloc kstat_irqs on node -1
[ 0.294442] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.294450] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.294583] alloc irq_desc for 25 on node -1
[ 0.294586] alloc kstat_irqs on node -1
[ 0.294596] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.294606] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.294755] alloc irq_desc for 26 on node -1
[ 0.294758] alloc kstat_irqs on node -1
[ 0.294767] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X
[ 0.294777] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.294879] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.294963] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.295099] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.295104] ACPI: Power Button [PWRB]
[ 0.295177] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.295181] ACPI: Power Button [PWRF]
[ 0.295973] ACPI: SSDT 7ff9e0b0 001C6 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.296354] processor LNXCPU:00: registered as cooling_device0
[ 0.296785] ACPI: SSDT 7ff9e280 0013A (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.297516] processor LNXCPU:01: registered as cooling_device1
[ 0.303301] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.303411] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.303964] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.305417] brd: module loaded
[ 0.306055] loop: module loaded
[ 0.306165] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.306285] ata_piix 0000:00:1f.1: version 2.13
[ 0.306306] alloc irq_desc for 22 on node -1
[ 0.306309] alloc kstat_irqs on node -1
[ 0.306318] ata_piix 0000:00:1f.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.306368] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.306447] isapnp: Scanning for PnP cards...
[ 0.355399] scsi0 : ata_piix
[ 0.398946] scsi1 : ata_piix
[ 0.400850] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.400854] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.400882] alloc irq_desc for 23 on node -1
[ 0.400886] alloc kstat_irqs on node -1
[ 0.400893] ata_piix 0000:00:1f.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[ 0.400899] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.400942] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.424469] Freeing initrd memory: 7772k freed
[ 0.428761] scsi2 : ata_piix
[ 0.428866] scsi3 : ata_piix
[ 0.428925] ata3: SATA max UDMA/133 cmd 0xa800 ctl 0xa400 bmdma 0x9400 irq 23
[ 0.428929] ata4: SATA max UDMA/133 cmd 0xa000 ctl 0x9800 bmdma 0x9408 irq 23
[ 0.429433] Fixed MDIO Bus: probed
[ 0.429484] PPP generic driver version 2.4.2
[ 0.429569] tun: Universal TUN/TAP device driver, 1.6
[ 0.429572] tun: © 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.429706] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.429738] alloc irq_desc for 20 on node -1
[ 0.429741] alloc kstat_irqs on node -1
[ 0.429750] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.429770] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.429774] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.429820] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.429844] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.429856] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.433735] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 0.433858] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdbeffc00
[ 0.447176] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.447306] usb usb1: configuration #1 chosen from 1 choice
[ 0.447347] hub 1-0:1.0: USB hub found
[ 0.447357] hub 1-0:1.0: 8 ports detected
[ 0.447446] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.447466] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.447510] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.447520] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.447524] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.447566] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.447592] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00008000
[ 0.447705] usb usb2: configuration #1 chosen from 1 choice
[ 0.447745] hub 2-0:1.0: USB hub found
[ 0.447755] hub 2-0:1.0: 2 ports detected
[ 0.447814] alloc irq_desc for 17 on node -1
[ 0.447817] alloc kstat_irqs on node -1
[ 0.447823] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.447830] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.447834] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.447877] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.447910] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00008400
[ 0.448023] usb usb3: configuration #1 chosen from 1 choice
[ 0.448061] hub 3-0:1.0: USB hub found
[ 0.448070] hub 3-0:1.0: 2 ports detected
[ 0.448126] alloc irq_desc for 18 on node -1
[ 0.448129] alloc kstat_irqs on node -1
[ 0.448135] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.448142] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.448146] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.448187] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.448220] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00008800
[ 0.448338] usb usb4: configuration #1 chosen from 1 choice
[ 0.448373] hub 4-0:1.0: USB hub found
[ 0.448382] hub 4-0:1.0: 2 ports detected
[ 0.448448] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.448456] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.448460] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.448507] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.448542] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00009000
[ 0.448656] usb usb5: configuration #1 chosen from 1 choice
[ 0.448698] hub 5-0:1.0: USB hub found
[ 0.448710] hub 5-0:1.0: 2 ports detected
[ 0.448836] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.448840] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.449361] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.449499] mice: PS/2 mouse device common for all mice
[ 0.449651] rtc_cmos 00:03: RTC can wake from S4
[ 0.449703] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.449732] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.449871] device-mapper: uevent: version 1.0.3
[ 0.449995] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.450085] device-mapper: multipath: version 1.1.0 loaded
[ 0.450089] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.450233] EISA: Probing bus 0 at eisa.0
[ 0.450262] Cannot allocate resource for EISA slot 8
[ 0.450264] EISA: Detected 0 cards.
[ 0.450360] cpuidle: using governor ladder
[ 0.450364] cpuidle: using governor menu
[ 0.450977] TCP cubic registered
[ 0.451149] NET: Registered protocol family 10
[ 0.451840] lo: Disabled Privacy Extensions
[ 0.452302] NET: Registered protocol family 17
[ 0.452899] Using IPI No-Shortcut mode
[ 0.452997] PM: Resume from disk failed.
[ 0.453018] registered taskstats version 1
[ 0.453365] Magic number: 6:876:644
[ 0.453448] rtc_cmos 00:03: setting system clock to 2010-08-05 18:36:36 UTC (1281033396)
[ 0.453452] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.453454] EDD information not available.
[ 0.469151] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.640881] ata1.00: ATAPI: TSSTcorp CDDVDW SH-S222A, SB02, max UDMA/66
[ 0.641017] ata3.00: ATA-6: WDC WD800JD-75JNA0, 05.01C05, max UDMA/100
[ 0.641021] ata3.00: 156250000 sectors, multi 16: LBA
[ 0.684656] isapnp: No Plug & Play device found
[ 0.685133] ata4.01: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7
[ 0.685137] ata4.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.691830] ata1.00: configured for UDMA/66
[ 0.691920] ata3.00: configured for UDMA/100
[ 0.699704] ata4.01: configured for UDMA/133
[ 0.700776] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S222A SB02 PQ: 0 ANSI: 5
[ 0.704489] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.704495] Uniform CD-ROM driver Revision: 3.20
[ 0.704624] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.704692] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 0.704855] scsi 2:0:0:0: Direct-Access ATA WDC WD800JD-75JN 05.0 PQ: 0 ANSI: 5
[ 0.705002] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 0.705145] scsi 3:0:1:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5
[ 0.705292] sd 3:0:1:0: Attached scsi generic sg2 type 0
[ 0.705381] sd 3:0:1:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 0.705422] sd 2:0:0:0: [sda] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 0.705542] sd 3:0:1:0: [sdb] Write Protect is off
[ 0.705546] sd 3:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.705566] sd 2:0:0:0: [sda] Write Protect is off
[ 0.705570] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.705624] sd 3:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.705685] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.705978] sdb:
[ 0.706069] sda: sdb1 sdb2 < sda1
[ 0.735915] sd 2:0:0:0: [sda] Attached SCSI disk
[ 0.751797] sdb5 sdb6 sdb7 >
[ 0.768541] sd 3:0:1:0: [sdb] Attached SCSI disk
[ 0.768557] Freeing unused kernel memory: 660k freed
[ 0.769036] Write protecting the kernel text: 4680k
[ 0.769091] Write protecting the kernel read-only data: 1840k
[ 0.792831] udev: starting version 151
[ 0.926361] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.926387] r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.926441] r8169 0000:02:00.0: setting latency timer to 64
[ 0.926505] alloc irq_desc for 27 on node -1
[ 0.926508] alloc kstat_irqs on node -1
[ 0.926526] r8169 0000:02:00.0: irq 27 for MSI/MSI-X
[ 0.927495] eth0: RTL8168b/8111b at 0xf8066000, 00:17:31:e2:d2:11, XID 18000000 IRQ 27
[ 0.930418] Floppy drive(s): fd0 is 1.44M
[ 0.953157] FDC 0 is a post-1991 82077
[ 1.080020] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 1.273072] usb 3-1: configuration #1 chosen from 1 choice
[ 1.294300] usbcore: registered new interface driver hiddev
[ 1.576018] usb 3-2: new full speed USB device using uhci_hcd and address 3
[ 1.718908] EXT4-fs (sdb6): mounted filesystem with ordered data mode
[ 1.742071] usb 3-2: configuration #1 chosen from 1 choice
[ 3.118124] generic-usb 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.10 Device [American Power Conversion Smart-UPS 1000 FW:652.12.I USB FW:4.2] on usb-0000:00:1d.1-1/input0
[ 3.141209] input: A4Tech USB Full Speed as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input4
[ 3.141321] generic-usb 0003:09DA:8090.0002: input,hidraw1: USB HID v1.11 Mouse [A4Tech USB Full Speed] on usb-0000:00:1d.1-2/input0
[ 3.178483] input: A4Tech USB Full Speed as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input5
[ 3.178622] generic-usb 0003:09DA:8090.0003: input,hiddev97,hidraw2: USB HID v1.11 Keyboard [A4Tech USB Full Speed] on usb-0000:00:1d.1-2/input1
[ 3.178747] usbcore: registered new interface driver usbhid
[ 3.178754] usbhid: v2.6:USB HID core driver
[ 14.142337] udev: starting version 151
[ 14.142578] Adding 6036472k swap on /dev/sdb5. Priority:-1 extents:1 across:6036472k
[ 14.252707] Linux agpgart interface v0.103
[ 14.342743] lp: driver loaded but no devices found
[ 14.427859] intel_rng: FWH not detected
[ 14.678093] type=1505 audit(1281022610.722:2): operation="profile_load" pid=551 name="/sbin/dhclient3"
[ 14.678781] type=1505 audit(1281022610.722:3): operation="profile_load" pid=551 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 14.679148] type=1505 audit(1281022610.722:4): operation="profile_load" pid=551 name="/usr/lib/connman/scripts/dhclient-script"
[ 15.225377] EXT4-fs (sdb7): mounted filesystem with ordered data mode
[ 16.114990] nvidia: module license 'NVIDIA' taints kernel.
[ 16.114995] Disabling lock debugging due to kernel taint
[ 17.205691] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 17.205722] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 17.211547] parport_pc 00:07: reported by Plug and Play ACPI
[ 17.211661] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 17.316392] nvidia 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.316402] nvidia 0000:04:00.0: setting latency timer to 64
[ 17.316409] vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 17.317702] NVRM: loading NVIDIA UNIX x86 Kernel Module 256.35 Wed Jun 16 18:57:17 PDT 2010
[ 17.320982] ppdev: user-space parallel port driver
[ 17.364609] lp0: using parport0 (interrupt-driven).
[ 17.447890] r8169: eth0: link up
[ 17.447899] r8169: eth0: link up
[ 17.465170] type=1505 audit(1281022613.510:5): operation="profile_load" pid=727 name="/usr/share/gdm/guest-session/Xsession"
[ 17.467314] type=1505 audit(1281022613.510:6): operation="profile_replace" pid=728 name="/sbin/dhclient3"
[ 17.468014] type=1505 audit(1281022613.514:7): operation="profile_replace" pid=728 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 17.468620] type=1505 audit(1281022613.514:8): operation="profile_replace" pid=728 name="/usr/lib/connman/scripts/dhclient-script"
[ 17.511985] type=1505 audit(1281022613.557:9): operation="profile_load" pid=729 name="/usr/bin/evince"
[ 17.521170] type=1505 audit(1281022613.566:10): operation="profile_load" pid=729 name="/usr/bin/evince-previewer"
[ 17.526547] type=1505 audit(1281022613.570:11): operation="profile_load" pid=729 name="/usr/bin/evince-thumbnailer"
[ 17.665579] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6

Может проблема в дровах на видюху, по скольку я ставил их с официального сайта Nvidia v.256.35
Изображениеnvidia-installer log
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Thu Jul 29 00:35:35 2010
installer version: 256.35

option status:
license pre-accepted : false
update : false
force update : false
expert : false
uninstall : false
driver info : false
precompiled interfaces : false
no ncurses color : false
query latest version : false
OpenGL header files : true
no questions : false
silent : false
no recursion : false
no backup : false
kernel module only : false
sanity : false
add this kernel : false
no runlevel check : false
no network : false
no ABI note : false
no RPMs : false
no kernel module : false
force SELinux : default
no X server check : false
no cc version check : true
force tls : (not specified)
X install prefix : (not specified)
X library install path : (not specified)
X module install path : (not specified)
OpenGL install prefix : (not specified)
OpenGL install libdir : (not specified)
utility install prefix : (not specified)
utility install libdir : (not specified)
doc install prefix : (not specified)
kernel name : 2.6.32-24-generic
kernel include path : (not specified)
kernel source path : (not specified)
kernel output path : (not specified)
kernel install path : (not specified)
proc mount point : /proc
ui : (not specified)
tmpdir : /tmp
ftp mirror : ftp://download.nvidia.com
RPM file list : (not specified)

Using: nvidia-installer ncurses user interface
-> License accepted.
-> Installing NVIDIA driver version 256.35.
-> Running distribution scripts
executing: '/usr/lib/nvidia/pre-install'...
-> done.
-> The distribution-provided pre-install script failed! Continue installation
anyway? (Answer: Yes)
-> Not probing for precompiled kernel interfaces.
-> Performing CC sanity check with CC="cc".
-> Kernel source path: '/lib/modules/2.6.32-24-generic/build'
-> Kernel output path: '/lib/modules/2.6.32-24-generic/build'
-> Performing rivafb check.
-> Performing nvidiafb check.
-> Performing Xen check.
-> Cleaning kernel module build directory.
executing: 'cd ./kernel; make clean'...
-> Building kernel module:
executing: 'cd ./kernel; make module SYSSRC=/lib/modules/2.6.32-24-generic/b
uild SYSOUT=/lib/modules/2.6.32-24-generic/build'...
NVIDIA: calling KBUILD...
test -e include/linux/autoconf.h -a -e include/config/auto.conf || ( \
echo; \
echo " ERROR: Kernel configuration is invalid."; \
echo " include/linux/autoconf.h or include/config/auto.conf are mis
sing."; \
echo " Run 'make oldconfig && make prepare' on kernel src to fix it
."; \
echo; \
/bin/false)
mkdir -p /tmp/selfgz4345/NVIDIA-Linux-x86-256.35/kernel/.tmp_versions ; rm -
f /tmp/selfgz4345/NVIDIA-Linux-x86-256.35/kernel/.tmp_versions/*
make -f scripts/Makefile.build obj=/tmp/selfgz4345/NVIDIA-Linux-x86-256.35/k
ernel
cc -Wp,-MD,/tmp/selfgz4345/NVIDIA-Linux-x86-256.35/kernel/.nv.o.d -nostdi
nc -isystem /usr/lib/gcc/i486-linux-gnu/4.4.3/include -Iinclude -I/usr/src
/linux-headers-2.6.32-24-generic/arch/x86/include -include include/linux/aut
oconf.h -Iubuntu/include -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wn
o-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-decla
ration -Wno-format-security -fno-delete-null-pointer-ch
ecks -O2 -m32 -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack
-boundary=2 -march=i586 -mtune=generic -maccumulate-outgoing-args -Wa,-mtune
=generic32 -ffreestanding -fstack-protector -DCONFIG_AS_CFI=1 -DCONFIG_AS_CF
I_SIGNAL_FRAME=1 -pipe -Wno-sign-compare -fno-asynchronous-unwind-tables -mn
o-sse -mno-mmx -mno-sse2 -mno-3dnow -Wframe-larger-than=1024 -fno-omit-frame
-pointer -fno-optimize-sibling-calls -pg -Wdeclaration-after-statement -Wno-
pointer-sign -fno-strict-overflow -fno-dwarf2-cfi-asm -fconserve-stack -I/tm
p/selfgz4345/NVIDIA-Linux-x86-256.35/kernel -Wall -MD -Wsign-compare -Wno-ca
st-qual -Wno-error -D__KERNEL__ -DMODULE -DNVRM -DNV_VERSION_STRING=\"256.35
\" -UDEBUG -U_DEBUG -DNDEBUG -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENA
ME=KBUILD_STR(nv)" -D"KBUILD_MODNAME=KBUILD_STR(nvidia)" -c -o /tmp/selfgz
4345/NVIDIA-Linux-x86-256.35/kernel/.tmp_nv.o /tmp/selfgz4345/NVIDIA-Linux-x
86-256.35/kernel/nv.c
set -e ; perl /usr/src/linux-headers-2.6.32-24-generic/scripts/recordmcoun
t.pl "i386" "32" "objdump" "objcopy" "cc" "ld" "nm" "" "" "1" "/tmp/selfgz43
45/NVIDIA-Linux-x86-256.35/kernel/nv.o";
cc -Wp,-MD,/tmp/selfgz4345/NVIDIA-Linux-x86-256.35/kernel/.nv_gvi.o.d -no
stdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.4.3/include -Iinclude -I/usr
/src/linux-headers-2.6.32-24-generic/arch/x86/include -include include/linux
/autoconf.h -Iubuntu/include -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes
-Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-de
claration -Wno-format-security -fno-delete-null-pointer-checks -O2 -m32 -mso
ft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2 -march
=i586 -mtune=generic -maccumulate-outgoing-args -Wa,-mtune=generic32 -ffrees
tanding -fstack-protector -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -
pipe -Wno-sign-compare -fno-asynchronous-unwind-tables -mno-sse -mno-mmx -mn
o-sse2 -mno-3dnow -Wframe-larger-than=1024 -fno-omit-frame-pointer -fno-opti
mize-sibling-calls -pg -Wdeclaration-after-statement -Wno-pointer-sign -fno-
strict-o
verflow -fno-dwarf2-cfi-asm -fconserve-stack -I/tmp/selfgz4345/NVIDIA-Linux-
x86-256.35/kernel -Wall -MD -Wsign-compare -Wno-cast-qual -Wno-error -D__KER
NEL__ -DMODULE -DNVRM -DNV_VERSION_STRING=\"256.35\" -UDEBUG -U_DEBUG -DNDEB
UG -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(nv_gvi)" -D
"KBUILD_MODNAME=KBUILD_STR(nvidia)" -c -o /tmp/selfgz4345/NVIDIA-Linux-x86-
256.35/kernel/.tmp_nv_gvi.o /tmp/selfgz4345/NVIDIA-Linux-x86-256.35/kernel/n
v_gvi.c
set -e ; perl /usr/src/linux-headers-2.6.32-24-generic/scripts/recordmcoun
t.pl "i386" "32" "objdump" "objcopy" "cc" "ld" "nm" "" "" "1" "/tmp/selfgz43
45/NVIDIA-Linux-x86-256.35/kernel/nv_gvi.o";
cc -Wp,-MD,/tmp/selfgz4345/NVIDIA-Linux-x86-256.35/kernel/.nv-vm.o.d -nos
tdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.4.3/include -Iinclude -I/usr/
src/linux-headers-2.6.32-24-generic/arch/x86/include -include include/linux/
autoconf.h -Iubuntu/include -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes
-Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-imp
licit-function-declaration -Wno-format-security -fno-delete-null-pointer-che
cks -O2 -m32 -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-
boundary=2 -march=i586 -mtune=generic -maccumulate-outgoing-args -Wa,-mtune=
generic32 -ffreestanding -fstack-protector -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI
_SIGNAL_FRAME=1 -pipe -Wno-sign-compare -fno-asynchronous-unwind-tables -mno
-sse -mno-mmx -mno-sse2 -mno-3dnow -Wframe-larger-than=1024 -fno-omit-frame-
pointer -fno-optimize-sibling-calls -pg -Wdeclaration-after-statement -Wno-p
ointer-sign -fno-strict-overflow -fno-dwarf2-cfi-asm -fconserve-stack -I/tmp
/selfgz4345/NVIDIA-Linux-x86-256.35/kernel -Wall -MD -Wsign-compare -Wno-cas
t-qual -Wno-error -D__KERNEL__ -DMODULE -DNVRM -DNV_VERSION_STRING=\"256.35\
" -UDEBUG -U_DEBUG -DNDEBUG -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAM
E=KBUILD_STR(nv_vm)" -D"KBUILD_MODNAME=KBUILD_STR(nvidia)" -c -o /tmp/self
gz4345/NVIDIA-Linux-x86-256.35/kernel/.tmp_nv-vm.o /tmp/selfgz4345/NVIDIA-Li
nux-x86-256.35/kernel/nv-vm.c
set -e ; perl /usr/src/linux-headers-2.6.32-24-generic/scripts/recordmcoun
t.pl "i386" "32" "objdump" "objcopy" "cc" "ld" "nm" "" "" "1" "/tmp/selfgz43
45/NVIDIA-Linux-x86-256.35/kernel/nv-vm.o";
cc -Wp,-MD,/tmp/selfgz4345/NVIDIA-Linux-x86-256.35/kernel/.os-agp.o.d -no
stdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.4.3/include -Iinclude -I/usr
/src/linux-headers-2.6.32-24-generic/arch/x86/include -include include/linux
/autoconf.h -Iubuntu/include -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes
-Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-de
claration -Wno-format-security -fno-delete-null-pointer-checks -O2 -m32 -mso
ft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2 -march
=i586 -mtune=generic -maccumulate-outgoing-args -Wa,-mtune=generic32 -ffrees
tanding -fstack-protector -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -
pipe -Wno-sign-compare -fno-asynchronous-unwind-tables -mno-sse -mno-mmx -mn
o-sse2 -mno-3dnow -Wframe-larger-than=1024 -fno-omit-frame-pointer -fno-o
ptimize-sibling-calls -pg -Wdeclaration-after-statement -Wno-pointer-sign -f
no-strict-overflow -fno-dwarf2-cfi-asm -fconserve-stack -I/tmp/selfgz4345/NV
IDIA-Linux-x86-256.35/kernel -Wall -MD -Wsign-compare -Wno-cast-qual -Wno-er
ror -D__KERNEL__ -DMODULE -DNVRM -DNV_VERSION_STRING=\"256.35\" -UDEBUG -U_D
EBUG -DNDEBUG -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(o
s_agp)" -D"KBUILD_MODNAME=KBUILD_STR(nvidia)" -c -o /tmp/selfgz4345/NVIDIA
-Linux-x86-256.35/kernel/.tmp_os-agp.o /tmp/selfgz4345/NVIDIA-Linux-x86-256.
35/kernel/os-agp.c
set -e ; perl /usr/src/linux-headers-2.6.32-24-generic/scripts/recordmcoun
t.pl "i386" "32" "objdump" "objcopy" "cc" "ld" "nm" "" "" "1" "/tmp/selfgz43
45/NVIDIA-Linux-x86-256.35/kernel/os-agp.o";
cc -Wp,-MD,/tmp/selfgz4345/NVIDIA-Linux-x86-256.35/kernel/.os-interface.o.
d -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.4.3/include -Iinclude
-I/usr/src/linux-headers-2.6.32-24-generic/arch/x86/include -include include
/linux/autoconf.h -Iubuntu/include -D__KERNEL__
-Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-
common -Werror-implicit-function-declaration -Wno-format-security -fno-delet
e-null-pointer-checks -O2 -m32 -msoft-float -mregparm=3 -freg-struct-return
-mpreferred-stack-boundary=2 -march=i586 -mtune=generic -maccumulate-outgoin
g-args -Wa,-mtune=generic32 -ffreestanding -fstack-protector -DCONFIG_AS_CFI
=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -pipe -Wno-sign-compare -fno-asynchronous-
unwind-tables -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -Wframe-larger-than=102
4 -fno-omit-frame-pointer -fno-optimize-sibling-calls -pg -Wdeclaration-afte
r-statement -Wno-pointer-sign -fno-strict-overflow -fno-dwarf2-cfi-asm -fcon
serve-stack -I/tmp/selfgz4345/NVIDIA-Linux-x86-256.35/kernel -Wall -MD -Wsig
n-compare -Wno-cast-qual -Wno-error -D__KERNEL__ -DMODULE -DNVRM -DNV_VERSIO
N_STRING=\"256.35\" -UDEBUG -U_DEBUG -DNDEBUG -DMODULE -D"KBUILD_STR(s)=#s"
-D"KBUILD_BASENAME=KBUILD_STR(os_interface)" -D"KBUILD_MODNAME=KBUILD_STR(n
vidia)" -c -o /tmp/selfgz4345/NVID
IA-Linux-x86-256.35/kernel/.tmp_os-interface.o /tmp/selfgz4345/NVIDIA-Linux-
x86-256.35/kernel/os-interface.c
set -e ; perl /usr/src/linux-headers-2.6.32-24-generic/scripts/recordmcoun
t.pl "i386" "32" "objdump" "objcopy" "cc" "ld" "nm" "" "" "1" "/tmp/selfgz43
45/NVIDIA-Linux-x86-256.35/kernel/os-interface.o";
cc -Wp,-MD,/tmp/selfgz4345/NVIDIA-Linux-x86-256.35/kernel/.os-registry.o.d
-nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.4.3/include -Iinclude -I
/usr/src/linux-headers-2.6.32-24-generic/arch/x86/include -include include/l
inux/autoconf.h -Iubuntu/include -D__KERNEL__ -Wall -Wundef -Wstrict-protot
ypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-functi
on-declaration -Wno-format-security -fno-delete-null-pointer-checks -O2 -m32
-msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2 -m
arch=i586 -mtune=generic -maccumulate-outgoing-args -Wa,-mtune=generic32 -ff
reestanding -fstack-protector -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME
=1 -pipe -Wno-sign-compare
-fno-asynchronous-unwind-tables -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -Wfr
ame-larger-than=1024 -fno-omit-frame-pointer -fno-optimize-sibling-calls -pg
-Wdeclaration-after-statement -Wno-pointer-sign -fno-strict-overflow -fno-dw
arf2-cfi-asm -fconserve-stack -I/tmp/selfgz4345/NVIDIA-Linux-x86-256.35/kern
el -Wall -MD -Wsign-compare -Wno-cast-qual -Wno-error -D__KERNEL__ -DMODULE
-DNVRM -DNV_VERSION_STRING=\"256.35\" -UDEBUG -U_DEBUG -DNDEBUG -DMODULE -D
"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(os_registry)" -D"KBUILD_MO
DNAME=KBUILD_STR(nvidia)" -c -o /tmp/selfgz4345/NVIDIA-Linux-x86-256.35/ker
nel/.tmp_os-registry.o /tmp/selfgz4345/NVIDIA-Linux-x86-256.35/kernel/os-reg
istry.c
set -e ; perl /usr/src/linux-headers-2.6.32-24-generic/scripts/recordmcoun
t.pl "i386" "32" "objdump" "objcopy" "cc" "ld" "nm" "" "" "1" "/tmp/selfgz43
45/NVIDIA-Linux-x86-256.35/kernel/os-registry.o";
cc -Wp,-MD,/tmp/selfgz4345/NVIDIA-Linux-x86-256.35/kernel/.nv-i2c.o.d -no
stdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.4.3/include -Iinclude -I/usr
/src/linux-headers-2.6.32-24-generic/arch/x86/include -include include/linux
/autoconf.h -Iubuntu/include -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes
-Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-de
claration -Wno-format-security -fno-delete-null-pointer-checks -O2 -m32 -mso
ft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2 -march
=i586 -mtune=generic -maccumulate-outgoing-args -Wa,-mtune=generic32 -ffrees
tanding -fstack-protector -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -
pipe -Wno-sign-compare -fno-asynchronous-unwind-tables -mno-sse -mno-mmx -mn
o-sse2 -mno-3dnow -Wframe-larger-than=1024 -fno-omit-frame-pointer -fno-opti
mize-sibling-calls -pg -Wdeclaration-after-statement -Wno-pointer-sign -fno-
strict-overflow -fno-dwarf2-cfi-asm -fconserve-stack -I/tmp/selfgz4345/NVIDI
A-Linux-x86-256.35/kernel -Wall -MD -Wsign-compare -Wno-cast-qual -Wno-error
-D__KERNEL__ -DMODULE -DNVRM -DNV_VERSION_STRING=\"256.35\" -UDEBUG -U_DEBUG
-DNDEBUG
-DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(nv_i2c)" -D"KBU
ILD_MODNAME=KBUILD_STR(nvidia)" -c -o /tmp/selfgz4345/NVIDIA-Linux-x86-256.
35/kernel/.tmp_nv-i2c.o /tmp/selfgz4345/NVIDIA-Linux-x86-256.35/kernel/nv-i2
c.c
set -e ; perl /usr/src/linux-headers-2.6.32-24-generic/scripts/recordmcoun
t.pl "i386" "32" "objdump" "objcopy" "cc" "ld" "nm" "" "" "1" "/tmp/selfgz43
45/NVIDIA-Linux-x86-256.35/kernel/nv-i2c.o";
cc -Wp,-MD,/tmp/selfgz4345/NVIDIA-Linux-x86-256.35/kernel/.nvacpi.o.d -no
stdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.4.3/include -Iinclude -I/usr
/src/linux-headers-2.6.32-24-generic/arch/x86/include -include include/linux
/autoconf.h -Iubuntu/include -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes
-Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-de
claration -Wno-format-security -fno-delete-null-pointer-checks -O2 -m32 -mso
ft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2 -march
=i586 -mtune=generic -maccumulate-outgoing-args -Wa,-mtune=gen
eric32 -ffreestanding -fstack-protector -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SI
GNAL_FRAME=1 -pipe -Wno-sign-compare -fno-asynchronous-unwind-tables -mno-ss
e -mno-mmx -mno-sse2 -mno-3dnow -Wframe-larger-than=1024 -fno-omit-frame-poi
nter -fno-optimize-sibling-calls -pg -Wdeclaration-after-statement -Wno-poin
ter-sign -fno-strict-overflow -fno-dwarf2-cfi-asm -fconserve-stack -I/tmp/se
lfgz4345/NVIDIA-Linux-x86-256.35/kernel -Wall -MD -Wsign-compare -Wno-cast-q
ual -Wno-error -D__KERNEL__ -DMODULE -DNVRM -DNV_VERSION_STRING=\"256.35\" -
UDEBUG -U_DEBUG -DNDEBUG -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=K
BUILD_STR(nvacpi)" -D"KBUILD_MODNAME=KBUILD_STR(nvidia)" -c -o /tmp/selfgz
4345/NVIDIA-Linux-x86-256.35/kernel/.tmp_nvacpi.o /tmp/selfgz4345/NVIDIA-Lin
ux-x86-256.35/kernel/nvacpi.c
set -e ; perl /usr/src/linux-headers-2.6.32-24-generic/scripts/recordmcoun
t.pl "i386" "32" "objdump" "objcopy" "cc" "ld" "nm" "" "" "1" "/tmp/selfgz43
45/NVIDIA-Linux-x86-256.35/kernel/nvacpi.o";
ld -m elf_i386 -r -o /tmp/selfgz4345/NVIDIA-Linux-x86-256.35/kernel/nvid
ia.o /tmp/selfgz4345/NVIDIA-Linux-x86-256.35/kernel/nv-kernel.o /tmp/selfgz4
345/NVIDIA-Linux-x86-256.35/kernel/nv.o /tmp/selfgz4345/NVIDIA-Linux-x86-256
.35/kernel/nv_gvi.o /tmp/selfgz4345/NVIDIA-Linux-x86-256.35/kernel/nv-vm.o /
tmp/selfgz4345/NVIDIA-Linux-x86-256.35/kernel/os-agp.o /tmp/selfgz4345/NVIDI
A-Linux-x86-256.35/kernel/os-interface.o /tmp/selfgz4345/NVIDIA-Linux-x86-25
6.35/kernel/os-registry.o /tmp/selfgz4345/NVIDIA-Linux-x86-256.35/kernel/nv-
i2c.o /tmp/selfgz4345/NVIDIA-Linux-x86-256.35/kernel/nvacpi.o
(cat /dev/null; echo kernel//tmp/selfgz4345/NVIDIA-Linux-x86-256.35/kernel
/nvidia.ko;) > /tmp/selfgz4345/NVIDIA-Linux-x86-256.35/kernel/modules.order
make -f /usr/src/linux-headers-2.6.32-24-generic/scripts/Makefile.modpost
scripts/mod/modpost -m -a -i /usr/src/linux-headers-2.6.32-24-generic/Modu
le.symvers -I /tmp/selfgz4345/NVIDIA-Linux-x86-256.35/kernel/Module.symvers
-o /tmp/selfgz4345/NVIDIA-Linux-x86-256.35/kernel/Module.symvers -S -w -s
WARNING: could not find /tmp/selfgz4345/NVIDIA-Linux-x86-256.35/kernel/.nv-k
ernel.o.cmd for /tmp/selfgz4345/NVIDIA-Linux-x86-256.35/kernel/nv-kernel.o
cc -Wp,-MD,/tmp/selfgz4345/NVIDIA-Linux-x86-256.35/kernel/.nvidia.mod.o.d
-nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.4.3/include -Iinclude -I/
usr/src/linux-headers-2.6.32-24-generic/arch/x86/include -include include/li
nux/autoconf.h -Iubuntu/include -D__KERNEL__ -Wall -Wundef -Wstrict-prototy
pes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-functio
n-declaration -Wno-format-security -fno-delete-null-pointer-checks -O2 -m32
-msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2 -m
arch=i586 -mtune=generic -maccumulate-outgoing-args -Wa,-mtune=generic32 -ff
reestanding -fstack-protector -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME
=1 -pipe -Wno-sign-compare -fno-asynchronous-unwind-tables -mno-sse -mno-mmx
-mno-sse2 -mno-3dnow -Wframe-larger-than=1024 -fno-omit-frame-pointer -fno-o
ptimize-sibling-calls -pg -Wdeclaration-after-s
tatement -Wno-pointer-sign -fno-strict-overflow -fno-dwarf2-cfi-asm -fconser
ve-stack -I/tmp/selfgz4345/NVIDIA-Linux-x86-256.35/kernel -Wall -MD -Wsign-c
ompare -Wno-cast-qual -Wno-error -D__KERNEL__ -DMODULE -DNVRM -DNV_VERSION_S
TRING=\"256.35\" -UDEBUG -U_DEBUG -DNDEBUG -D"KBUILD_STR(s)=#s" -D"KBUILD_B
ASENAME=KBUILD_STR(nvidia.mod)" -D"KBUILD_MODNAME=KBUILD_STR(nvidia)" -DMO
DULE -c -o /tmp/selfgz4345/NVIDIA-Linux-x86-256.35/kernel/nvidia.mod.o /tmp/
selfgz4345/NVIDIA-Linux-x86-256.35/kernel/nvidia.mod.c
ld -r -m elf_i386 -T /usr/src/linux-headers-2.6.32-24-generic/scripts/modu
le-common.lds --build-id -o /tmp/selfgz4345/NVIDIA-Linux-x86-256.35/kernel/n
vidia.ko /tmp/selfgz4345/NVIDIA-Linux-x86-256.35/kernel/nvidia.o /tmp/selfgz
4345/NVIDIA-Linux-x86-256.35/kernel/nvidia.mod.o
NVIDIA: left KBUILD.
-> done.
-> Kernel module compilation complete.
-> Installing both new and classic TLS OpenGL libraries.
-> Searching for conflicting X files:
-> done.
-> Searching for conflicting OpenGL files:
-> done.
-> Installing 'NVIDIA Accelerated Graphics Driver for Linux-x86' (256.35):
executing: '/sbin/ldconfig'...
executing: '/sbin/depmod -aq 2.6.32-24-generic'...
-> done.
-> Driver file installation is complete.
-> Running post-install sanity check:
-> done.
-> Post-install sanity check passed.
-> Shared memory test passed.
-> Running runtime sanity check:
-> done.
-> Runtime sanity check passed.
-> Would you like to run the nvidia-xconfig utility to automatically update you
r X configuration file so that the NVIDIA X driver will be used when you res
tart X? Any pre-existing X configuration file will be backed up. (Answer: N
o)
-> Installation of the NVIDIA Accelerated Graphics Driver for Linux-x86
(version: 256.35) is now complete. Please update your XF86Config or
xorg.conf file as appropriate; see the file
/usr/share/doc/NVIDIA_GLX-1.0/README.txt for details.

  • 0

Пользователь №: 231

Изображение


#2269
myst

myst

    Clone Grade Theta

  • Tech III Pilots
  • PipPipPipPip
  • 1192 сообщений
664
  • EVE Ingame:Shinah Myst
  • Corp:CEDRA
  • Client:Eng

[ 0.008206] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.008210] CPU: L2 cache: 2048K

Кэш маленький. У кого там Core2 Duo, покажите, сколько у вас кэша.
  • 1

#2270
ApostolRUS

ApostolRUS

    Clone Grade Delta

  • Tech III Pilots
  • PipPip
  • 230 сообщений
-43
  • EVE Ingame:-//-//-
  • Corp:Quinto Regimiento
  • Ally:Quinta columna
  • Client:Eng

Кэш маленький. У кого там Core2 Duo, покажите, сколько у вас кэша.

Кэш собственно 2х2Мб=4Мб это показатель моего проца

Изображение


Изображение


ТТХ проца на сайте Intel
  • 0

Пользователь №: 231

Изображение


#2271
myst

myst

    Clone Grade Theta

  • Tech III Pilots
  • PipPipPipPip
  • 1192 сообщений
664
  • EVE Ingame:Shinah Myst
  • Corp:CEDRA
  • Client:Eng
Я про L1. Кроме того, нет L3.
  • 0

#2272
ApostolRUS

ApostolRUS

    Clone Grade Delta

  • Tech III Pilots
  • PipPip
  • 230 сообщений
-43
  • EVE Ingame:-//-//-
  • Corp:Quinto Regimiento
  • Ally:Quinta columna
  • Client:Eng

Я про L1. Кроме того, нет L3.

Соббственно l3 и нету на самом проце а l1 тоже равен заявленным характеристикам.
Говно проц. ему уже года 3 уже. это первый из 2х ядерных. у меня на буке стоит core 1.7 -ева там так сильно не грузит проц. но там видях ати х1100 и fps всегда 15-20 и ни каких скачков. Но linux там гемор надо Х откатывать чтоб дровки поставить, вообщем гемор
  • 0

Пользователь №: 231

Изображение


#2273
myst

myst

    Clone Grade Theta

  • Tech III Pilots
  • PipPipPipPip
  • 1192 сообщений
664
  • EVE Ingame:Shinah Myst
  • Corp:CEDRA
  • Client:Eng

а L1 тоже равен заявленным характеристикам

А как кэш может не соответствовать заявленным характеристикам? Соответствует он, но маленький.
  • 0

#2274
ApostolRUS

ApostolRUS

    Clone Grade Delta

  • Tech III Pilots
  • PipPip
  • 230 сообщений
-43
  • EVE Ingame:-//-//-
  • Corp:Quinto Regimiento
  • Ally:Quinta columna
  • Client:Eng

А как кэш может не соответствовать заявленным характеристикам? Соответствует он, но маленький.

Я про то что в линухе кажет правельно
  • 0

Пользователь №: 231

Изображение


#2275
myst

myst

    Clone Grade Theta

  • Tech III Pilots
  • PipPipPipPip
  • 1192 сообщений
664
  • EVE Ingame:Shinah Myst
  • Corp:CEDRA
  • Client:Eng

Я про то, что в линухе кажет правильно

Так я и не говорил, что неправильно показывает. Всё правильно, но мало. Поэтому и загрузка ЦП высокая.
  • 0

#2276
ApostolRUS

ApostolRUS

    Clone Grade Delta

  • Tech III Pilots
  • PipPip
  • 230 сообщений
-43
  • EVE Ingame:-//-//-
  • Corp:Quinto Regimiento
  • Ally:Quinta columna
  • Client:Eng

Так я и не говорил, что неправильно показывает. Всё правильно, но мало. Поэтому и загрузка ЦП высокая.

А я подумал что тебе dmesg нужен чтоб проверить корректоли оредилилось оборудование ;) да и в окнах жрет проца поменьше 80-70%
  • 0

Пользователь №: 231

Изображение


#2277
MobileSfinks

MobileSfinks

    Newbie

  • Tech II Pilots
  • 21 сообщений
-4
  • EVE Ingame:FlyingSfinks
  • Corp:CTPAHHUKU
Приветствую. Поставил Еву на Линукс (Ubuntu 10.04, wine 1.1.42)
Всё запустилось после некоторого шаманства подсказанного в данном топике. Но вот застрял на том, что сижу за проксёй.
Попробовал httptunnel и proxychains - чего то не работает. Есть у кого нить данные как запустить Еву через вышеупомянутые туннели или может есть другие какие утилитки?
Читал статью с извращённым подключением через домашний роутер - не то.
Отвечу на наводящие вопросы - задавайте.
  • 0

#2278
dimson

dimson

    Clone Grade Eta

  • Tech III Pilots
  • PipPipPipPip
  • 488 сообщений
14
  • EVE Ingame:idimson
  • Client:Eng

Приветствую. Поставил Еву на Линукс (Ubuntu 10.04, wine 1.1.42)
Всё запустилось после некоторого шаманства подсказанного в данном топике. Но вот застрял на том, что сижу за проксёй.
Попробовал httptunnel и proxychains - чего то не работает. Есть у кого нить данные как запустить Еву через вышеупомянутые туннели или может есть другие какие утилитки?
Читал статью с извращённым подключением через домашний роутер - не то.
Отвечу на наводящие вопросы - задавайте.

перенаправлять трафик можно с помощью iptables + squid
  • 0

#2279
MobileSfinks

MobileSfinks

    Newbie

  • Tech II Pilots
  • 21 сообщений
-4
  • EVE Ingame:FlyingSfinks
  • Corp:CTPAHHUKU
Сижу за двумя проксями. Прямого выхода в инет у меня на машине нету. Был бы прокинулбы напрямую и мозг не мучал бы.
Сеть работает типа так:
<HOST w EVEClient> <> <MyProxy/10.0.1.1> <> <UpperProxy/10.0.0.1>
Моя прокся это сквид. Верхняя, тоже сквид, является для моей parent. Мне нужно стуннелировать еву на мою проксю вот и всё. Сейчас сидел пытался запустить с proxytunnel.

[/proxytunnel --proxy=10.0.1.1:3128 --dest=87.237.38.200:26000 -vi -H "User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Win32)"
Connected to 10.0.1.1:6588 (local proxy)

Tunneling to 87.237.38.200:26000 (destination)
Communication with local proxy:
 -> CONNECT 87.237.38.200:26000 HTTP/1.0
 -> Proxy-Connection: Keep-Alive
 -> User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Win32)
 <- HTTP/1.0 200 Connection established

Tunnel established.
5~����e
333333@��EVE-EVE-RELEASE@ccp
т.е. как видно коннект то к серверу есть. Время 16:50 (UTC+2) - ДТ вроде уже закончился давно.

в ярлыке евы прописал
env WINEPREFIX="/home/user/.wine" wine "C:\Program Files\CCP\EVE\eve.exe" /end /LUA:OFF /server:127.0.0.1

толку ноль - не нюхает ева сервер пачамуто.

Сообщение отредактировал MobileSfinks: 11 August 2010 - 16:51

  • 0

#2280
Eklykti

Eklykti

    Пушистый изумруд

  • Tech III Pilots
  • PipPipPipPipPip
  • 1916 сообщений
110
  • EVE Ingame:Eklykti
  • Corp:.ANS.
  • Ally:UAFL
  • Channel:ANSUA
  • Client:Eng
Если ты внимательно прочитаешь ман и посмотришь на выхлоп, то поймёшь, что порт оно не слушает, а то, что приходит с удалённого сервера, тупо вываливает на stdout. Однако, в том же мане есть упоминание inetd. Соответственно, по идее, если proxytunnel прикрутить к inetd, и в inetd назначить ему порт 26000, то может и заработать.
  • 0




0 посетителей читают тему

0 members, 0 guests, 0 anonymous users